walmart l shaped desk

Please contact us Mon-Fri 9:00 AM - 6:00 PM PST at (855) 686-3835 or email support@etekcity.com Safety Use & Care • DO NOT point the laser-light at another person or animal. The sticker is located on the left side of the Lasergrip. Doing so will void any warranty. 2. Adjustable Emissivity Sign SCAN HOLDA N NON OF 000.0°C -MAX 8988 CAUTION Unit Conversion To switch between units of temperature measurement, press the °C/°F button at any time while the Lasergrip is on. 2. This handy household tool also features laser visual guidance, so you’ll always know you’re scanning the right spot. 1x Etekcity Lasergrip 1022 Thermometer 1x 9V DC Battery 1x User’s Manual . Emissivity Adjustment / Max Temperatures 6. Unit (°C/°F) / DOWN 5. User Manual Questions or Concerns? Have a question? 1. Point the Lasergrip towards the surface of measurement. All files are original, not repacked or modified in any way by us. 5. IR Sensor 8. In addition, the readout display features a backlight which can be turned on if needed. You may refer to the emissivity reference chart for correct surface emissivity values. This thermometer cannot test the temperature of target objects through across the glass. 2. WARNING: THIS DEVICE PRODUCES CLASS 2 LASER RADIATION. Questions or Concerns? You deserve it! transparent 0.95 Brass Polished 0.02-0.05 Rubber 0.95 The device warning and aperture safety information are also labeled directly on the device; the sticker is located on the right side of the Lasergrip. LCD Display 2. This creates a spot measurement area of 1.18 inches (3 cm) in diameter. Wood 0.90-0.95 Textile powdered 0.96 Paper 0.95 PAIR Polarity facing upward Charcoal Carbon 0.85 Sand 0.90 0.92-0.96 To take accurate temperature measurement of reflective surfaces with low emissivity, place a strip of black masking tape over the surface and allow for it to adjust to the temperature of the surface for approximately 30 minutes. • Keep the thermometer away from electromagnetic fields produced by objects such as arc welders and induction heaters. • In the vicinity of use, make any bystanders aware of the dangers of looking directly into the laser pointer. Besides, the steam, dust, smog will lower the accuracy of testing. THE LASER LIGHT IS INVISIBLE TO THE HUMAN EYE. Display Backlight On/Off 3. Press the measurement trigger once again to make another measurement. Insert the battery into the compartment and close the compartment lid, making sure the wiring is not being pinched by the compartment lid. Features & Specifications • Laser guided targeting for aiming precision • Narrow distance-spot ratio for accurate results at greater distances • Safely measure hazardous or inaccessible objects • Standard 9V battery powers up to 12 hours of cumulative use • Auto-off after 15 seconds of inactivity • Measurement Range: -58°F ~1022°F (-50°C ~ 550°C) • Accuracy: + 2% / + 2°C • Resolution: 0.1°F/°C • Maximum Output: <1mW • Wavelength: 630 - 670nm • Distance-Spot Ratio: 12:1 • Response Time: <500ms • Emissivity (Adjustable): 0.1 - 1.0 • Battery: DC 9V IMPORTANT: Read all the instructions in this manual. 1x 9V DC Battery. This means you may measure the temp of a smaller area at the same distance compared to other 8:1 thermometers; thus the readings are much more accurate! Measure the surface, scanning the taped section, eliminating the issue of inaccuracy. © 2016 Etekcity Corporation.All Rights Reserved, Ready to use our new smart WiFi outlets? 1x Etekcity Lasergrip 1022D Thermometer 1x 9V DC Battery 1x User's Manual Note: 1. - 5 - -6 -7 -8. Non-reflective surfaces have a higher emissivity (closer to 1) than reflective surfaces (closer to O). Inaccurate results may occur when measuring reflective surfaces such as glass, polished wood, and granite. 0.80-0.90 Mortar 0.95 Brick DETEKCITY Asphalt 9V 6F22 or 6LR61 Battery 0.90-0.96 Rock 0.7 Marble Wiring is not bulging out of the compartment 0.94 0.90 a simpler life starts here. • DO NOT touch the lens or wipe it using anything other than a soft cloth or cotton swab. °C/°F Temperature Result 7. Our helpful and friendly customer support specialist can help you. Once the battery is properly installed, press the measurement trigger to activate the device. It turns on and begins reading the temperature with one press of the trigger. • DO NOT allow children to operate the device • Use a 9V battery when replacing the battery within the device. Laser Pointer / UP 4. Plaster 0.89-0.91 Emissivity The emissivity of a material is its efficiency in emitting thermal energy. 4. Clear text displays the measured temperature in either Celsius or Fahrenheit. Please contact us Mon-Fri 9:00 AM - 6:00 PM PST at (855) 686-3835 or email support@etekcity.com visit etekcity.com for more products. Please Wait " + counter.toString() + " seconds. AVOID EXPOSURE EHS TRXX LASER RADIATION IS EMITTED FROM THIS APERATURE LASER RADIATION -- DO NOT STARE INTO BEAM WAVELENGTH 630-670nm MAXIMUM OUTPUT<1mW CLASS II LASER PRODUCT Operation Surface Temperature Measurement NOTE: The Lasergrip cannot measure the temperature of objects behind glass. (adsbygoogle = window.adsbygoogle || []).push({}); Post questions, comments, reviews or page errors in the comment box below. Should you have any questions or concerns, feel free to contact our helpful customer support team toll-free at 855.686.3835 or by email at support@etekcity.com. 12:1 High distance spot ratio! 2. This Etekcity non-contact IR temperature gun is easy to operate. To make better accuracy, cover the surface to be measured with masking tape or flat black paint. Ceramics O. Get our exclusive deals and news on the latest products. Once the laser is pointed to the desired point of measurement, release the trigger and the LCD display will lock the calculated temperature. (See Page 7 for details) 0.9 0.85-0.92 Lacquerwork lackluster 0.97 Clay Carbon Cement 0.90 Sand Soap Bubble 0.75-0.80 Glass Water 0.93 Textile Snow 0.83-0.90 Heated food Ice 0.96-0. 3. 95 Steel and iron 0.80 Limestone 0.98 Wool Natural 10.94 Oxidized 0.5 Paint 0.93 Lead For the most accurate results, make sure the target has a surface area of twice the corresponding spot diameter. The information herein is for personal use and informational purposes only. Failure to comply with the instructions in this manual or use of the device, in ways other than the ones mentioned in this manual, may result in hazardous radiation exposure. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm). Open the battery compartment and remove the used battery. inimo WIN NOTE: The Lasergrip LCD will display 'OH' when the measured temperature is above the measurable range, and will display 'OL' when the measured temperature is below the measurable range. Laser On Back-light On Continue Scanning 5. • The thermometer measures surface temperature, not internal temperature. Find how-to videos, manuals, and other helpful instructions.Smart WiFi Outlet Support. To make better accuracy, cover the surface to be measured with masking tape or flat black paint.

Air Fryer Corn Dog Bites, Aurora, Il Fire Department Salary, Mathematical Logic As Based On The Theory Of Types, Would Like To Meaning In Marathi, Martin D-18 Review, Traditional English Pie Recipes, Little Tikes Clearance Sale,